Quantcast
Channel: Desktop Operating Systems and Recovery topics
Viewing all 40885 articles
Browse latest View live

workstation graphics card change

$
0
0

I want to upgrade the graphics card to a amd radeon pro wx7100 from an amd fire pro 2100- i have put the new card in and it beeps three times red and three times white and no output to the monitor- i reported to HP and an engineer came out and checked BIOS etc, said the graphics card was duff, i have a new card and the same is happening so cannot be the graphics cards, i put the old fire pro back in and all works fine any ideas 


hp purchased recovery win 7 media not working

$
0
0

bought from hp distribution center the 4 disk recovery for win 7 -it worked in 2014 but the unit crashed again cannot get it to work again.  i wanted to keep the windows media center since i got the tv tuner. no windows media came with unit. do i just throw away this $1000 computer?

Z800 CPU Upgrade

$
0
0

Hello,

I've got a 2009 HP Z800 Workstation and I'm trying to upgrade the cpu to Xeon X5675 but the PC wont start up after the fitting the cpu and giving 4 seperate beeps with the fans on high speed, the PC work fine again when I put in the old cpu Xeon X5550

Is this a compatibility issue or the bios need upgrading?

Thanks

All in one desktop

$
0
0

We can’t power up our desktop 

CMOS checksum is invalid

$
0
0

i just purchased an adapter for this hp notebook and when pressing and holding the power button...It will light up and then turn off. But sometimes the power led stays on but the computer screen remains blank then a message appears that says the following: 

 

THE CMOS CHECKSUM IS INVALID. THE CMOS WILL BE RESET TO THE DEFAULT CONFIGURATION AND WILL BE REBOOTED. PLEASE CHECK SETUP OPTIONS TO SEE IF THEY CHANGE. 

CMOS RESET (502)

enter-reboot the system 

 

and then the message disappears and back to a black screen. I do not hear anything when the power led turns on. 

HP partition recovery failed "unexpected error condition occurred during transiting

$
0
0

So, my computer crashed and hp wanted me to recover the windows partition. I cannot boot into any version of windows, whether it be safemode or normal because it is stuck in the HP Software Installatioan command window. I have no commands that I can use to try to restart the installation, and my usb boot drive is not working. I have coursework due in 4 hours. I have installed the ISO boot files onto a usb drive, and it is not booting directly from the usb drive as it should.

Upgrade windows home to pro

$
0
0

hi I buy from Microsoft sore windows pro I did upgrade , ( from HOME to PRO ) . later I format my pc and now I can not upgrade to pro there is a problem . It says im on windows home without key ^^

HDD GPT is valid and it is different than backup GPT

$
0
0

After I used the HP Cloud Recovery Download Tool to install Windows 10 (version 19041) i have this screen when i turn on my desktop.. Anyone know what to do?20200727_100518.jpg


Task bar windows start, keyboard windows start and task bar windows search will not work.

Stop Code: KERNEL DATA INPAGE ERROR

$
0
0

Stop code - kernel data inpage errorStop code - kernel data inpage error

Computer hacked

$
0
0

I believe my system has been taken over by a hacker. I was contacted by a firewall company a month ago saying they would  install for me and give me virus protection on all my devises if I paid them 1 time fee and I did and they fixed all my problems and then they called me to say I have a problem from someone I Texas and Iowa trying to sign in. I was at work at the time and scheduled a call back and forgot about it and missed call a couple times and now none of my computers will work!

How do I update BIOS if not an update in Support do MSN support ask me to do it by contacting HP?

$
0
0

MSN can not help me with problem of windows 10 not waking up after being in sleep mood goes to white screen.  They say may BIOS is outdated and contact HP  but can not find a phone number to same.  and No BIOS update in HP support . Anyone have any answers

Hangs a Lot

$
0
0

It hangs a lot and for log hours. It takes too long to start. It hangs every day. I cannot open more than one tab. I am unable to do any work

REPLACING PC

$
0
0

Pease tell me 

my system which date replace in my office

What is the data folder for?

$
0
0

Hello

Can I firstly say I am not very good with computers. As long as it works I am ok. So I have a new PC - well 4 months old and I remember when I bought it I was quite pleased as it came with a lot of hard disk space - something like 1 TB. Now today I was looking at the folders and I noticed that I only have 163 GB of space left, but that there is another folder that has 1.3 TB called data.

So what is that folder? And why are all the programs going into the 'Windows' folder. 

Or is this ok.

Thanks.

Keith


My computer started an HP BIOS UPDATE for no reason, does not go away

$
0
0

For no reason, and out of the blue, my computer started an HP BIOS UPDATE.

I do not know what that is, and I did not think that I needed it.

Now it does not go away. It says "progress 100%", but nothing more happens, it is stuck.

I have tried several times to turn it off and then on again. It starts the same update, and then gets stuck at 100 %; nothing more happens after that.

What can I do?

Does an HP All-in-one 19-2114 support Miracast?

$
0
0

Does an HP All-in-one 19-2114 support Miracast?

Care Pack Registration Issue

$
0
0

Hello

 

I purchased a Care Pack from HP late in 2019 and received an email confirmation/receipt at the time. I recently needed tech help and called HP support . I was told that my warranty was expired. I pointed out that I had a Care Pack and gave them a an agreement number. They were able to confirm the Care Pack but told me it was NOT REGISTERED and gave me instructions on how to do that. Since then, I've tried to contact HP at 800-407-6210 and also at 877-232-8009 to get this taken care of.  After many attempts and waiting on hold, I connected with a representative who asked me a bunch of questions to confirm the Care Pack agreement. He was able to locate it and also the original purchase of the computer as it was directly from HP. He pointed out however that the product number on the Care Pack was for a tower and not my Envy all in one desktop and proceeded to correct it. I have him the Serial Number, Product Number and everything else he asked for . As he was supposedly update the system, we got disconnected. I have now tried at least 20 times to call back to get someone to help me and finish this process. I don't know if my Care Pack is now registered. Also, I never got a Care Pack certificate. Needless to say I'm extremely disappointed and upset at how hard it is to connect with someone at HP and that it takes so much effort. I also don't know why HP doesn't just automatically register the Care Pack when purchased. The tech/sale agent that sold it to me said nothing about registration. Can someone please help? I've been a loyal HP customer for over 12 years and this is unacceptable. thanks 

HP 24-f0054na lcd screen panel

$
0
0

Good evening all,

 

A friend accidentally dropped his all in one causing lcd damage to the top left hand corner. I’m competent enough to fix it but have been struggling to find a replacement lcd panel. I understand that Samsung provide lcd panels...

 

anyone attempted this? Specifically does anyone have the exact part number? Any advise would be gratefully received.

 

stay safe 

Update BIOS

$
0
0

I cannot find the BIOS firmware in the downloads ... I have a BIOS from 9/12/2014 and want to update it from AMI 80.23 to whatever is current BIOS.  

Viewing all 40885 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>